You are here: About the Landing Page Optimizer > Changing an LPO Test

Changing an Existing LPO Test

You can change an existing LPO test that has the status Active. For example, a test that was stopped manually can be restarted, or a test that has expired can be prolonged.

You can change an LPO test as follows:

Click Stop. The test will stop immediately. You can either restart the test or select a winner, see Finalizing an LPO Test.
Change the settings for the LPO test and click Save. You can change the following settings:
- Test name
- End date
- Percentage of visitors included in the test
Click Start on a test that has been stopped. By clicking Start again, you can restart the test and the test data will be restored.

When the original page and its variations has been included in an LPO test, do not change or remove them in Edit mode during the test! If you do, it cannot be undone. The test will “break” and you will need to start over with the test.